dongfeng 145 refrigerated truck

dongfeng 145 refrigerated truck

If you have any question or advise, please press

the bottom to leave us message.

  • 程力专用车
  • 程力专用车
  • 程力专用车
  • 程力专用车
Dongfeng 145 Refrigerated truck, Chassis model: EQ1110GLJ, adopting Dongfeng 145 Original chassis, Euro Ⅲ Emission standard, Cummins 170hp engine, Dongfeng 6 speed transmission, 3.6ton front bridge, 9ton rear bridge, 900-20 nylon tyre, with air-conditioner, the wheelbase: 3950mm,
The insulation body of dongfeng 145 refrigerated truck dimension(L*W*H ) is 5100*2000*2000(mm), the cargo volume: 20cbm. And the cargo material use inner and outer glass steel,
Cooling units adopts USA THERMO KING dependent cooling unit and the cooling temperature can reach 20 degree below zero, controlled at the driver cab. 

Dongfeng 145 refrigerated truck
 Total mass(kg)  11495  Curb mass(kg)  6300
 Rated mass(kg)  5000  Chassis model  EQ1110GLJ
 Driver cab person  3  Max speed(km/h)  90
 Approach/departure angle(°)  33/19  Front/rear suspension(mm)  1250/2200
 Overall dimension(mm)  7400X2470X2850  Cargo body dimension(mm)  XX
 Axles  2  Axle load(kg)  4295/7200
 Tyre  9.00-20,9.00R20  Tyre nos.  6
 Front tread(mm)  1900,1810  Rear tread(mm)  1800
 Wheelbase(mm)  3950  Springs  8/11+8
 Emission standard  GB3847-2005,GB17691-2005 Euro Ⅲ  Fuel type  Diesel
 Engine model  Manufacturer  Displacement  Power
B170 30
B170 33
Dongfeng Cummins 5900

The refrigerated truck is made up of special truck chassis, heat-insulating van box(usually made up of PU material, fiberglass, color plate, stainless steel, etc.), refrigerating unit, temperature recorder inside the van, etc. As for the special requirements refrigerated trucks, such as meet hook refrigerated truck, could choose to fit meat hook, aluminum alloy guide rail, ventilating slot, etc. 
The manufacturing technology of the refrigerated van
by and sandwich crafts, which is most used in the bigger refrigerated truck manufacturer. Using this sandwich crafts, the refrigerated trucks having perfect heat-insulating.
  1. The refrigerator truck panels are made  advanced foam generation crafts
  2. one frame generation crafts,
  3. vacuum absorb type glued.
All the refrigerated freezer insulated van trucks from  Chengli Special Automobile Co., Ltd., adopt both exterior and interior with glass steel sheets, stainless steel, alunimum alloy etc.upon request, and the middle is PU slices with vacuum negative pressure one-formed casting, and the thickness is 8mm, approved the related Ministry of Health of food grade requirements, etc. just like sandwich structure. The refrigerated van has the advantages of high strength; strong anti-corrosion and aging resistance, low heat-conducting property, non-pollution, non-easy destroy, etc. And the baseboard is aluminum alloy anti-skipping diamond board, which assuring the insulation ability and the compact resistance of the baseboard. There arealuminum alloy ventilation slots on the baseboard. The frame of standard rear double doors adopts the stainless steel structure frame with light mass and perfect corrosive resistance, etc. The door edgings frames are sealed with the imported high quality epdm rubber, making sure the van insulation stability. Door edgings, door locks and accessories use stainless steel materials.

Related products:
Leave the feedback on line

We will contact with you in one day.

Email: *

(We do not sell or share your information to other people.)


Refrigerated truck
Fire truck
Fuel truck
truck with crane
mixer truck
Asphalt spreading car stone se
high pressure cleaning washer
ambulance car
liquid food tanker truck
bulk feed truck
high altitude operation truck
road sweeper truck
LED advertising truck
wrecker tow truck
Special vehicles
Semi trailer
Septic truck
Garbage truck
Water truck
Dump truck