dongfeng compactor garbage truck
This compression garbage truck adopts 1730mm wide dongfeng original driver cab, the wheelbase: 3300mm, Chaochai 4102 engine, 525 transmission, 2T front bridge, 3.5T Rear Bridge, 7.00-16 nylon tyres; air-cut brake, etc. The volume of this do
If you have any question or advise, please press
the bottom to leave us message.
This compression garbage truck adopts 1730mm wide dongfeng original driver cab, the wheelbase: 3300mm, Chaochai 4102 engine, 525 transmission, 2T front bridge, 3.5T Rear Bridge, 7.00-16 nylon tyres; air-cut brake, etc.
The volume of this dongfeng Furuika compression garbage truck is 3cbm, with changeover mechanism, adopting electromechanical integration technology solution, with the help of automatic control system and manual control system of electromechanical integration, through some special devices, such as carriage, precompressor and push shovel, realizing garbage disposed, crushed or crushed, strong draw, forced the garbage into the garbage bucket, and compacted and shirked.
Product name |
chengliwei |
|
Truck name |
Compression garbage truck |
Truck model |
CLW5060ZYS3 |
Engine model |
CY4102-C3F |
Engine manufacturer |
Dongfeng Chaoyang Chaochai Power |
Displacemnt(ml) |
3856 |
Engine power |
70 |
Emission standard |
Euro Ⅲ |
Overall dimension(L*W*H)(mm) |
6470,6320×2050×2560 |
Cargo dimension(L*W*H) |
× × |
Total mass(Kg) |
6495 |
Rated mass(kg) |
1000 |
Curb mass(kg) |
5365 |
Driver cab ) |
2.3 |
Approach/Departure angle |
19/10,19/12 |
Front/rear suspension(mm) |
1032/2138,1032/1988 |
wheelbase(mm) |
3300 |
Axle load(kg) |
2825/3670 |
axle |
2 |
Springs |
8/9+5,6/8+4 |
Tyre no. |
6 |
Tyre |
7.00-16 |
Front tread(mm) |
1506 |
Rear tread(mm) |
1466 |
Steering type |
Steering wheel |
Max speed(km/h) |
90 |
Chassis model |
EQ1060TJ20D3 |
-
Garbage basket:it is adopting the frame structure of welding the strengthen beam and steel, beatiful outlook, light weight, good load-carrying capability, non deformablity. The push shovel manufactured by steel skeleton and folded panel, not only delicate structure, but also making the garbage evenly, discharging clean thoroughly. The precompresser is made up of precompresser shell, operating slide, skimmer blade, etc. every compartment adopting good load carrying bean sheet or van structure, firm structure, ligh weight. The basket used phosphide anti-rust treatment, and coated with anti-rust painting.
-
Hydraulic system: using the eletronic control and hydrualic control through controlled converting to make sure every activity accuratly and reliably. Adopting leading hydraulic lifting safety circuit,improving the using reliablity and efficiency. The principle is installing holding balancing valve in the hydraulic lifting cylinder. The valve stops the direct connecting between lifting cylinder and hydraulic hose, even the pipeline bursts, the precompresser cannot fall down suddenly as an accident, improving the safety.
-
Charging and discharging way: flip bucket mechanism charging and discharging, non pollution to operation staff.
-
There is a special rubber strip sealing the garbage basket and precompresser, good sealing, without the second time pollution.
The rear garbage truck from Chengli has the advantages as below.
-
collecting waste easily, changing the
-
high compression ratio, large loading volume;
-
automatic working,
-
perfect economic
-
double insurance system
-
choosing changover mechanism: choosing changover mechanism