3cbm garbage compressor
dongfeng 3-5cbm compression garbage truck
If you have any question or advise, please press
the bottom to leave us message.
Dongfneg furuika 3-5cbm compression garbage truck, adopts dongfeng 1730mm wide dongfeng 1730mm B07 driver cab, 3300mm wheelbase, chaochai 100hp engine, 525 transmission, 2ton front bridge/3.5ton rear bridge, 7.00-16 nylon tyre, etc.
The volume of this dongfeng Furuika compression garbage truck is 3-5cbm, with changeover mechanism, adopting electromechanical integration technology solution, with the help of automatic control system and manual control system of electromechanical integration, through some special devices, such as carriage, precompressor and push shovel, realizing garbage disposed, crushed or crushed, strong draw, forced the garbage into the garbage bucket, and compacted and shirked.
Chengli Special Automobile Co., Ltd. as the famous manufacturer of garbage truck, garbage compactor, side loader garbage truck, hook lifter garbage truck, waste foods garbage truck, etc. in China since 2004, it could offer garbage compactors, swing arm garbage truck, side loader garbage truck, hook lift garbage truck, hydraulic garbage truck, sweeper truck, sealed dump garbage truck, etc. More information, please feel free to contact us.
Dongfeng 3-5cbm compression garbage truck |
Total mass(kg) |
7300 |
Curb mass(kg) |
5160 |
Rated mass(kg) |
2010,1945 |
Chassis model |
DFA1070SJ35D6 |
Driver cab person |
2,3 |
Max speed(km/h) |
90 |
Approach/departure angle(°) |
19/12,19/14 |
Front/rear suspension(mm) |
1032/2138,1032/1988 |
Overall dimension(mm) |
6470,6320X2050X2570 |
Cargo body dimension(mm) |
XX |
Axles |
2 |
Axle load(kg) |
2920/4380 |
Tyre |
7.00-16 14PR,7.00R16 14PR |
Tyre nos. |
6 |
Front tread(mm) |
1506,1404,1500,1441 |
Rear tread(mm) |
1466,1458,1520,1500 |
Wheelbase(mm) |
3300 |
Springs |
8/9+5,6/8+4,6/6+5 |
Emission standard |
GB3847-2005,GB17691-2005Euro Ⅳ |
Fuel type |
Diesel |
Engine model |
Manufacturer |
Displacement |
Power |
CY4102-CE4F
|
Chaochai |
3856
|
73
|
-
The working principles of compression garbage truck from Chengli Special Automobile Co., Ltd.
-
-
Garbage basket:it is adopting the frame structure of welding the strengthen beam and steel, beatiful outlook, light weight, good load-carrying capability, non deformablity. The push shovel manufactured by steel skeleton and folded panel, not only delicate structure, but also making the garbage evenly, discharging clean thoroughly. The precompresser is made up of precompresser shell, operating slide, skimmer blade, etc. every compartment adopting good load carrying bean sheet or van structure, firm structure, ligh weight. The basket used phosphide anti-rust treatment, and coated with anti-rust painting.
-
Hydraulic system: using the eletronic control and hydrualic control through controlled converting to make sure every activity accuratly and reliably. Adopting leading hydraulic lifting safety circuit,improving the using reliablity and efficiency. The principle is installing holding balancing valve in the hydraulic lifting cylinder. The valve stops the direct connecting between lifting cylinder and hydraulic hose, even the pipeline bursts, the precompresser cannot fall down suddenly as an accident, improving the safety.
-
Charging and discharging way: flip bucket mechanism charging and discharging, non pollution to operation staff.
-
There is a special rubber strip sealing the garbage basket and precompresser, good sealing, without the second time pollution.
The rear loader garbage trucks from Chengli has the advantages as below.
-
collecting waste easily, changing the
-
high compression ratio, large loading volume;
-
automatic working,
-
perfect economic
-
double insurance system
-
choosing changover mechanism: choosing changover mechanism