new design Customized aluminum alloy feed truck for sale
Release time：2020-11-23 14:19 Editor：truckdf From：Chengli
new design Customized aluminum alloy feed truck for sale
Chengli Special Automobile Co., Ltd. Is the leading manufacturer and supplier of feed trucks in China. With many years’ development, we Chengli Company can manufacture and sell farm-oriented feed trucks(electronic system discharging or hydraulic system discharging) from 8m3 to 40m3 and 40m3-50m3 animal feed transported semitrailer, etc. And more and more CLW Brand feed trucks have been exported all over the world.
Poultry feed truck is main used for delivering, loading and discharging of feed pellets of different feed factories, large-type poultry farms, and also for transporting some non-corrosive feed pellets, such as pellets from pharmaceutical factory and turnover of grain depots, etc. the feed trucks manufactured by Chengli Special Automobile Co., Ltd. can transporting various feed pellet with the different compartments, the dream transporting vehicles for poultry farms and feed factories. More information, please feel free to contact with Ms. Anita Deng. The hot sale line is 0086 13886878855.
The common models are the carbon steel material. Recently, our engineers design the new light duty aluminum alloy material bulk feed body mounted on truck with the volume of 30cbm and 40cbm.
More pictures of CLW brand aluminum alloy material bulk feed body mounted on truck as below.
Chengli Special Automobile Co., Ltd. Is the leading manufacturer and supplier of feed trucks in China. With many years’ development, we Chengli Company can manufacture and sell farm-oriented feed trucks(electronic system discharging or hydraulic system discharging) from 8m3 to 40m3 and 40m3-50m3 animal feed transported semitrailer, etc. And more and more CLW Brand feed trucks have been exported all over the world.
Poultry feed truck is main used for delivering, loading and discharging of feed pellets of different feed factories, large-type poultry farms, and also for transporting some non-corrosive feed pellets, such as pellets from pharmaceutical factory and turnover of grain depots, etc. the feed trucks manufactured by Chengli Special Automobile Co., Ltd. can transporting various feed pellet with the different compartments, the dream transporting vehicles for poultry farms and feed factories. More information, please feel free to contact with Ms. Anita Deng. The hot sale line is 0086 13886878855.
The common models are the carbon steel material. Recently, our engineers design the new light duty aluminum alloy material bulk feed body mounted on truck with the volume of 30cbm and 40cbm.
More pictures of CLW brand aluminum alloy material bulk feed body mounted on truck as below.
Comparative advantages of aluminum alloy feed truck and carbon steel feed truck:
1. Light weight, 2.2-2.3 tons for four axles, 1.7 tons for three axles, and 1.4-1.5 tons for two axles. (After optimizing the structure, the weight will be reduced by 100-200KG)
Improve the single-trip transportation capacity, reduce the fuel consumption of empty vehicles, and improve customer economy.
2. The aluminum alloy plate is anti-oxidation and anti-rust to avoid the pollution of the materials in the warehouse.
3. Effective anti-corrosion, can easily deal with the disinfection of farms, the performance is not weakened, and it will not drip yellow water.
4. The inner wall is smooth, allowing the material to slide down and discharge smoothly, without additional vibration device.
5. Aluminum alloy can effectively absorb vibration, weaken the vibration of the vehicle in the process of punching, and extend the service life of the vehicle.
6. The recycling value of aluminum alloy is high (up to 60%), which can effectively reduce the customer's fixed cost investment.
The advantages of Chengli aluminum alloy feed truck compared with competing manufacturers:
1. The plate is made of 5083H111 high-strength aluminum-magnesium alloy, with a strength of 275-345MPa, which is harder than ordinary carbon steel. Different from the competing 5454 O-state aluminum plate, the strength is only 215-275MPa.
2. Solid materials, the whole vehicle adopts the plate combination of t5+t6, and the reinforcement adopts the profile. Through the force analysis, the rigidity is better, which can effectively prevent the expansion of the box and the deformation of the tank. Different from competing products, the plate material of t3 is more prone to deformation, and the tank body is "soft and collapsed", and it is easy to bulge out after being filled.
3. A more optimized process, adjustment of the production process and welding parameters, to ensure the flatness of the side of the tank body, meet the structure, and improve the overall appearance. Different from the barbaric operation of competing products, the tank can only be assembled and restored, internally welded, and the overall appearance cannot be guaranteed.
4. Strict quality control, overall tooling platform positioning, and whole process inspection to ensure that each process meets the process requirements of the drawings and the products meet the quality requirements. Different from the random production of competing products, there is no sense of design. You can only paint cats and tigers. The appearance looks similar, and the quality of internal details cannot be guaranteed.
5. Excellent welding technique. The ‘fish-scale pattern’ of each weld is the basic requirement. The weld is formed at one time, and the whole is full and uniform. You have the confidence not to paint. Different from the gas shielded welding of competing products, the welding seam is not uniform, and it is easy to contain slag and black.
6. High-quality accessories, stainless steel toolbox, electric control box, aluminum alloy fender, measuring protection, beautiful appearance, quality guaranteed. Different from the ordinary carbon steel accessories of competing products, it is easy to rust and has a short service life.
